Post by account_disabled on Feb 27, 2024 22:23:42 GMT -6
The scene is common in large urban centers. Driver stopped at traffic lights, suddenly hears a loud crack and like lightning a hand invades the car, grabs the cell phone and thousands of pieces of glass cover the passenger seat. This type of robbery is increasingly common, unfortunately. An alternative to mitigate this problem is anti-vandalism film. The more fortunate opt for total vehicle armor. However, full armor is expensive and is not the appropriate solution for all types of vehicles, as it adds weight. The advantage is the high level of protection, especially against firearm shots. For those with a more limited budget, there is the alternative of using anti-vandal films, a special type of polyethylene terephthalate (PET) film that reinforces and prevents the car's side windows from shattering when impacted. It is worth remembering that the side windows are made of tempered glass, which shatters into several pieces when hit hard.
Windshields are made of laminated glass, with two or more layers of glass interspersed with a transparent film, which prevents fragmentation. Vandal-resistant PET films are manufactured with a special material, which have high mechanical, thermal and chemical resistance, good transparency and impermeability. They must comply with the ABNT 16578 standard of 05/2017 – Plastic glazing applied to road vehicles – Requirements and test methods. Differences Anti-vandal films Lithuania Phone Number differ from common films due to their rigidity and adhesion. The impact resistance is 10 to 20 times greater, and this means that many blows are needed to pierce the glass. While tempered glass without film breaks with a stone, protected glass may even crack, but it does not fall apart, preventing a burglar from entering. It is important to remember that glass with anti-vandalism film does not retain firearm projectiles like armored glass.
There are different resistance levels for anti-vandal films, which are determined by the thickness of the film. The thicker, the more resistant and more expensive. Despite this, they are all penetrable, depending on the number of blows and strength. If hit constantly, they will eventually give way. There are currently several brands on the market. Pay attention to the application process of the anti-vandal film, which is different from common films. The ideal is to remove the side glass of the door and apply the film to the entire glass, as when it receives an impact, it is the level of vibration that determines the breaking point of the glass. The larger the area covered by the film, the greater the resistance. Did you like the content? Want to know more? Then follow Nakata on social media such as Instagram , YouTube and Facebook.
Windshields are made of laminated glass, with two or more layers of glass interspersed with a transparent film, which prevents fragmentation. Vandal-resistant PET films are manufactured with a special material, which have high mechanical, thermal and chemical resistance, good transparency and impermeability. They must comply with the ABNT 16578 standard of 05/2017 – Plastic glazing applied to road vehicles – Requirements and test methods. Differences Anti-vandal films Lithuania Phone Number differ from common films due to their rigidity and adhesion. The impact resistance is 10 to 20 times greater, and this means that many blows are needed to pierce the glass. While tempered glass without film breaks with a stone, protected glass may even crack, but it does not fall apart, preventing a burglar from entering. It is important to remember that glass with anti-vandalism film does not retain firearm projectiles like armored glass.
There are different resistance levels for anti-vandal films, which are determined by the thickness of the film. The thicker, the more resistant and more expensive. Despite this, they are all penetrable, depending on the number of blows and strength. If hit constantly, they will eventually give way. There are currently several brands on the market. Pay attention to the application process of the anti-vandal film, which is different from common films. The ideal is to remove the side glass of the door and apply the film to the entire glass, as when it receives an impact, it is the level of vibration that determines the breaking point of the glass. The larger the area covered by the film, the greater the resistance. Did you like the content? Want to know more? Then follow Nakata on social media such as Instagram , YouTube and Facebook.